- 21.43%

BO MẠCH PLC FX3U-32MT-6AD2DA

1,400,000 1,100,000

Mô tả

  • Điện áp nguồn : DC24V.
  • Ngõ vào Input :16Ngõ DC.
  • Ngõ ra Output : 16 Ngõ Transistor.
  • Truyền thông : MODBUS RTU , RS-485.
  • Xung tốc độ cao : Y0-Y7: dùng cho xuất xung
  • Y11-Y17: ngõ ra trinsistor bình thường.
  • Ngõ vào analog : 6AD ( 0~10V / 0~20mA ).
  • Ngõ ra analog : 2DA.
  • RTC : Có
  • Phần mềm lập trình : GX-Developer , GX-Work2.
  • Kết nối HMI : Siemens, Mitsubishi, Omron, Delta, Kinco, Weinview, v.v.
  • Kích thước : 121mm x 87mm x 22mm.

Input Power

DC24

Number of steps

8000 steps; 2 communication ports: 1 RS232 (DB9 serial port is communication port for the FX3u protocol 38400,7,E,1; 1 RS485 (485 selection)  communication protocol can be set D8120).

X input element

X0-X27 DC24 input,Low level,X0-5 is a high-speed count input port (the Default is 12K)

Y output element

Y0-Y11 for optimal relay output,relay output current 5A.

4 continuation electric apparatus 1 common end, altogether 3 common ends

Analog input

6 analog input, 12 bit precision,  3 channel analog input 0-10V, 3 channel analog input 0-20MA; read analog RD3A instruction

Analog output

2 analog output, 12 bit precision, output voltage: 0-10V. output analog voltage with WR3A instruction

Intermediate relay

M0-M3071, power-down save range can be set M0-M1023, the default M500-M1023

Step point

S0-1023, power-down save range can be set S0-S1023, the default S500-S9999

100Ms timer

T0-T199 Accumulated power-down saving T184-T199

10Ms timer

T200-T249 Accumulated power-down saving T246-T249

1Ms timer

T250-T383, where T250-255 is the cumulative type

16-bit counter

C0-C199, power-down save C100-C199

32-bit counter

C200-C219, save the power-down C220-C234

32-bit high-speed counter

C235-255; C235-C240 for the single-phase counter, not multiplier; C241-240 for the single-phase calculator, 2 octave; C2470249 for the dual-phase counter, not multiplier; C250-252 for dual-phase counter, ; C253-C255 for the dual-phase counter, 4 octave

Register D

D0-D7999, power-down save the range can be set D0-7999

Indirect addressing pointer V, Z

V0-7, Z0-7

P The subroutine jump number

P0-63

I interrupt

X0-5 external interrupt, timer interrupt (1MS unit) counter interrupt

Special M components

M8000 run-time normally closed, M8002 power pulse, M8011 is 10Ms pulse,
M8012 is 100Ms pulse, M8013 is 1s pulse, M8014 is minute pulse

Đánh giá

Chưa có đánh giá nào.

Be the first to review “BO MẠCH PLC FX3U-32MT-6AD2DA”